Schaller Godin LGX pickups on a pre wire

The pickups are made in Germany by Schaller for the Godin LGX guitar.

They represent two noiseless singles in a humbucker housing.There are two bundles with four wires plus two shields come out of each pockup.

At that moment they are connected with a three-position rotary switch, which determines which half of the pickup works or the entire humbucker, and on the three-stage strat switch, the position is standard - bridge, both, neck pickup. When they work in pairs, they are connected in parallel, but they can be connected in series or split with a push-pull.Note that one push-pull is for two circuits so you will need two of them. That's why I decided to connect them as four humbuckers with a rotary switch.The combinations are much more than other adapters.

I put them on a pickguard so you don't get confused when desoldering and transferring to another guitar, and the cables are wound on "springs" so I don't short them.

There are clips on the net about how they sound. I personally find them to be very clear and dynamic, with more of a PAF nuance in the way I connected them, but if they were connected in series, they would sound much louder.

The condition is visible from the photos, and they work perfectly fine.

Will be very carefully packed for safe shipping!