€ 110
Categorías de pedales
- Modelado de amplificadores
- EQ
- Flangers
- Pelusa
- Sintetizadores de guitarra
- Loop y samplers
- Multiefectos
- Generadores de ruido
- Puertas y reducción del ruido
- Octava y tono
- Overdrive y boost
- Pedales de bajo
- Pedalboards y fuentes de alimentación
- Desfasadores
- Preamplificadores
- Reverb
- Moduladores en anillo
- Trémolo
- Sintonización
- Pedales vocales
- Wahs y filtros
- Otros
- Tampón
- Simuladores de armarios
- Coro y vibrato
- Compresión y sustain
- Controladores, volumen y expresión
- Retraso
- Distorsión
Marca
Sound Sculpture
Modelo
footsim
Condición
Usado - Menta
País del fabricante
Estados Unidos
País
Greece
Estado/Región
Θεσσαλία
Ciudad
Larissa
Número de referencia
NOIZ617881
Aceptar intercambio
No
Descripción
Πωλείται το Sound Sculpture footsim σε άριστη κατάσταση.
Στέλνω παντού με αντικαταβολή.
The FootSim footswitch simulator replaces the mechanical footswitches that are used with amplifiers to control the overdrive and reverb functions of the amp so that these functions can be controlled by a MIDI foot controller or other MIDI based device. TheFootSim may also be used to control any signal processor or other device that has a footswitch input.
The FootSim can simulate both a push on/push off (steady state) switch as well as a momentary type switch. Push/push switches are the type of switches used with most all traditional amps. Momentary switches are used to control more modern amps or for pulsing delay units that have a "tap" function for setting delay time from your MIDI foot controller.The FootSim is a relay based device, which is to say that relays are used to replace the mechanical footswitches. Using relays instead of the usual transistors insure that any device that normally uses mechanical switches can now be replaced with the FootSim without compatibility problems.
The FootSim can be controlled with either MIDI Program Change commands or with Control Change commands for use with "Instant Access Switches" available on some MIDI foot controllers
Manual: https://www.scribd.com/document/627840148/FootSim-user-guide
Στέλνω παντού με αντικαταβολή.
The FootSim footswitch simulator replaces the mechanical footswitches that are used with amplifiers to control the overdrive and reverb functions of the amp so that these functions can be controlled by a MIDI foot controller or other MIDI based device. TheFootSim may also be used to control any signal processor or other device that has a footswitch input.
The FootSim can simulate both a push on/push off (steady state) switch as well as a momentary type switch. Push/push switches are the type of switches used with most all traditional amps. Momentary switches are used to control more modern amps or for pulsing delay units that have a "tap" function for setting delay time from your MIDI foot controller.The FootSim is a relay based device, which is to say that relays are used to replace the mechanical footswitches. Using relays instead of the usual transistors insure that any device that normally uses mechanical switches can now be replaced with the FootSim without compatibility problems.
The FootSim can be controlled with either MIDI Program Change commands or with Control Change commands for use with "Instant Access Switches" available on some MIDI foot controllers
Manual: https://www.scribd.com/document/627840148/FootSim-user-guide
- 361 Vistas
- Publicado en: hace 1 mes
- Lista de informes Cancelar informe