ΠΙΚΑΠ TECHNICS SL - 1100

Πωλειται ΠΙΚΑΠ TECHNICS SL - 1100.....εδω παραθετω τα χαρακτηριστικα του..Type Direct drive player system

Turntable 35 cm Aluminum Die-cast, 2.0 kg
Inertial mass 320 kg / cm2
Motor Ultra-low speed electronic commutator motor
Number of revolutions 33 1/3, 45 rpm
Rotational frequency switching system Electronic control system
Fine adjustment of rotational speed By electronic control system
Rotation speed independent adjustment
Rotational speed adjustment range + / - 5 per cent
Wow flutter 0.03% or less (W. R. M.S.)
Signal-to-noise ratio 60 dB or more
Bootup Normal operation at 1/2 rotation (33 1/3rpm)
Tone Arm Section
Format Needle pressure direct reading type
Universal S-shaped tone arm
Static balance type
Anti-skating force control
Effective arm length 235mm
Overhang 14mm
Offset Angle 21 ゜
Tracking error ± 1.75 °
Needle pressure adjustment range Can be read directly in units of 0 ~ 5g and 0.5g
Applicable Cartridge Weight 2g ~ 9.5g
8.5g ~ 16g (when auxiliary weight is used)

Pwer 240 VAC, 50Hz/60Hz
Power consumption 4.0W
External dimensions Width 510x Height 195x Depth 390 mm
Weight 13.5kg.This high-end player system takes advantage of the high performance of the direct drive motor.
A DC motor with ultra-low-speed electronic control is used for the motor. It is free from fluctuations in power supply voltage and power supply frequency, and large torque can be obtained with a small amount of electric power. This motor has an inertial mass of 320 kg ・ cm.2Turntable reaches normal speed at 1/2 turn, and quick start is also available.The turntable is made of die-cast aluminum 35 cm in diameter and 2.0 kg in weight. The dynamic balance of each part is precisely adjusted, and the speed can be finely adjusted with a strobe.The motor, turntable and player case are made of die-cast aluminum, and the total weight reaches 13.5 kg.The tone arm has been developed for SL-1100.The balance adjustment is a rack-and-pinion type. When the knob is pulled after the balance is taken, the scale returns to 0. From that point, the needle pressure can be accurately applied to the desired needle pressure while directly reading the scale.To cancel the inside force, simply turn the upper anti-skating force control knob according to the needle pressure.Since the arm base is fixed with screws, it can be attached and detached.The body is supported by four legs with built-in insulators to cut off external vibration, and the height can be adjusted by turning these legs.The output terminal is a pin-jack type.Dust cover is included..Arm panel (die-cast / wood), strobe light and wood base were sold separately as options.ειναι σε αριστη κατασταση πληρως λειτουργικο ποιοτικοτατο και ακρως συλλεκτικο και σπανιο παγκοσμιως.φοραει τον κορυφαιο βραχιονα ΕPA-110 της εταιριας.συνοδευεται απο το SH 11 L1 STROBO LIGHT (φως νυκτος) και το αυθεντικο dust cover.τιμη πωλησης 1200 ευρω.ΠΑΡΑΚΑΛΩ ΟΧΙ ΑΝΤΑΛΑΓΕΣ - ΟΧΙ ΠΑΖΑΡΙΑ - ΟΧΙ ΑΠΟΚΡΥΨΗ