3 tube 12AX7
2 channels DRIVE/CLEAN
Vintage/Modern modes for the Drive channel, also for this channel MultiGain mode (A1M/A250K)
Vintage modes (inspired by Soldano SLO-100)/Modern modes (inspired by Rectifier)
Classic transformer power supply (230v)
There is also a through output (Bypass) for recording. The BYPASS output is essentially a TRHU output for recording DI records. And it has three operating modes:
A.T-B - Active True Bypass - when both the input and output are buffered, the signal to the lamp input also goes through the buffer.
T.T. - True Tube - when the signal from INPUT is fed directly to the tube, and BYPASS is sent through a buffer
T.B. - True Bypass - like T.T. only the other way around - the input to the lamp is organized through a buffer, and BYPASS itself is directly connected to INPUT.
There is also a 9V output for powering external devices (effects pedals, etc.). The stabilizer is “linear” and this output is decoupled from the preamp via a common wire.
Two modes of output socket operation. In the first case, this is the output directly after the master handle, this is an analogue of our Power Amp socket.  That is, the output is as raw as possible. And the second mode is a linear tube output with an output signal regulator. Well, there is a SOLO mode, this is essentially an additional master, and you can tune it, say, a little louder, thereby emphasizing the necessary parts.
Dimensions ≈ 212 x 150 x 48 mm, weight - 2kg
Delivery is discussed individually