Dawner Prince Starla Tap Tempo Tremolo

Το πετάλι βρίσκεται σε πολύ καλή κατάσταση και δουλεύει άψογα. Είναι αναλογικό, μικρό σε μέγεθος, handmade στη Κροατία απο την Dawner Prince και έχει τα παρακάτω χαρακτηριστικά:

Compact all-feature tap-tempo tremolo
Synthesis of two precisely combined electronics
A high-quality analogue tremolo controlled by a versatile digital tap-tempo microprocessor
Controls: Volume, Waveshape, Speed, Depth
Switch: 1/3/2 tempo multiplier
LED: Tap / Resync, status
Footswitch: Tap / Resync, status
Input (6.3 mm jack)
Output (6.3 mm jack)
Power adapter connector (coaxial connection 5.5 x 2.1 mm, negative polarity inside)
Current consumption: 30 mA
Power supply via 9 V battery or 9-18 V DC power supply (suitable power supply Art.409939, not included)
True bypass
Dimensions (W x D x H): 60 x 60 x 31 mm
Weight: 25

Depth
On minimum settings, Starla can be used as a signal booster. Increasing the depth control, increases the tremolo effect in your signal; from light shimmering, through mild transparent-traditional, all the way to a deep swings and ‘machine gun-like’ sounds. Thanks to a huge depth range, this tremolo is able to chop up any signal sent in or out of it. It is very useful when put in front of high gain amps or pedals as it can cut the sound down to a dead silence.

Speed
There are 3 ways to set the speed of the tremolo effect: by using a speed knob, tap tempo footswitch or control voltage/remote tap switch via Sync port. Speed is affected by the position of the Multiplier (1/3/2) toggle switch. If the Multiplier switch is set at a higher rate, speed knobs sweep will change as well.

Waveform
Starla utilizes eight different waveforms, including a random one. Combining every waveform with Duty trim potentiometer produces numerous wave shapes for you to explore. Duty trimmer pot modifies the duty cycle of all waveforms except Random.

Volume
We added volume control for two reasons: first to avoid a noticeable drop in volume when effect is engaged, which is a problem most tremolos have, and second to be able to use Starla as an excellent volume booster without adding any distortion to the signal when Depth control is on minimum setting.

Sync port
This port allows Starla to communicate with other devices. Depending on how the internal jumper is set up (remove the backplate to reach the jumper), Starla can send control signal to synchronize other devices to its’ LFO rate or it can accept control signal to be synchronized by other devices. It can also accept remote tap foot switch.

Tap tempo
Starla’s tap tempo microprocessor calculates tempo by taking the last two user taps so it plays in sync with your music. You can also choose different tap to tremolo rate ratios using 1/3/2 Multiplier switch: 1:1, 1:2 and 1:3. Once a tempo has been tapped in, Multiplier switch serves as an in-time speed control.
Power Input Voltage: 9 - 18V

Τηλ. επικοινωνίας 6978416154